Machin Forum Forum Index Machin Forum
THE place to discuss the definitive stamp
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

DGR103 update

Post new topic   Reply to topic    Machin Forum Forum Index -> Machin News
View previous topic :: View next topic  
Author Message
Machin Man

Joined: 08 Jul 2007
Posts: 969
Location: Houston, Texas pending eye surgery

PostPosted: Thu Jun 20, 2013 8:04 pm    Post subject: DGR103 update Reply with quote

DGR103 - Important update
The latest Deegam Report is ready to be downloaded and read. It contains two notes from Doug that will interest all who use the handbook and care to stay informed.

The first explains some corrections necessary due to what appear to me to be mis-information from Royal Mail (SHOCK and SURPRISE !!! ) and failure to print and deliver stamp products as promised.

Doug leads off with:
" ...WHEN I set 10 April 2013 as the date for uploading DGR102, I assumed
that I would have plenty of time to scan, measure and create graphics for
all the new stamps expected on 27 March as a consequence of the tariff change
on 2 April. It was not to be. Right up until the last minute for sending the pdf file
to my website guru (which I did on 9 April) it proved difficult, not only to obtain
correct information but to obtain actual stamps and other products. In the event,
DGR102 as posted contained some inaccuracies. ..."

And followed with a detailed explanation.
There are also the graphics for SAPs 183, 184, and 185 as well as DP s 456 and 459.

There is a chart showing the 80 new Horizon labels and another displaying the date for stamps with MA13 and M13L. as well as the usual details for new discoveries and recent issues.

Finally Doug has an announcement that I'll quote completely rather than stumble about with an explanation.

" ....Report will be issued on 31 August 2013
This is the last Deegam Report to contain Profiles. They are used by only a small number of CD owners and make downloads from my website unnecessarily long for non-users. Also, I no longer have the time to create them, quite apartfrom the difficulties I have with Adobe InDesign which I have mentioned before.
If you use the Profiles, please e-mail me to register your interest. I aim to create a set of graphics, including the correct perforations, phosphor bars etc. and will send a set to those who respond. These will be free of any charge and will be unrestricted, enabling you to add your own text, taken from the catalogue lists which will continue to be included in Reports ..."

Deegam Report No. 103
D. G. A. Myall, 23 June 2013
DGR103 10
The next Deegam
" .... You may think you understood what you thought I said, but I'm not sure you realize that what you think you heard is not what I thought I meant. .... "
Charlie Jensen
Lecanto, Florida
Back to top
View user's profile Send private message Send e-mail
Display posts from previous:   
Post new topic   Reply to topic    Machin Forum Forum Index -> Machin News All times are GMT
Page 1 of 1

Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

Powered by phpBB © 2001, 2005 phpBB Group